Description
Description
The Tenda TEG5328F is a high-performance Layer 3 Managed Gigabit Switch designed for enterprise, campus and medium-to-large network environments. It features 24 × Gigabit RJ45 ports and 4 × 1000Mbps SFP ports, providing reliable high-density connectivity and fiber uplink options. Advanced Layer 3 routing, VLAN, ACL, QoS, link aggregation and network management features make it suitable for aggregation and core network deployments.
Key Features
- 24 × 10/100/1000Mbps Gigabit RJ45 ports
- 4 × 1000Mbps SFP ports for fiber uplinks
- Layer 3 managed switching
- 56Gbps switching capacity
- 41.70Mpps packet forwarding rate
- IPv4 static routing and VLAN-based routing
- IEEE 802.1Q VLAN support
- STP, RSTP and MSTP
- LACP and static link aggregation
- IGMP Snooping V1/V2/V3
- MAC and IP ACL
- DHCP Server, Relay and Snooping
- SNMP V1/V2/V3
- QoS with up to 8 queues
- 6kV lightning protection
- 16K MAC address table
- 12MB packet buffer
- Fanless design for quiet operation
Specifications
- Model: Tenda TEG5328F
- Switch Type: Layer 3 Managed Gigabit Switch
- RJ45 Ports: 24 × 10/100/1000Mbps
- SFP Ports: 4 × 1000Mbps Base-X SFP
- Console Port: 1
- Switching Capacity: 56Gbps
- Packet Forwarding Rate: 41.70Mpps
- MAC Address Table: 16K
- Packet Buffer: 12MB
- Jumbo Frame: 10KB
- VLAN: IEEE 802.1Q VLAN and Layer 3 VLAN interfaces
- Routing: VLAN-based routing, IPv4 static routing, Static ARP
- Port Modes: Access, Trunk and Hybrid
- Spanning Tree: STP, RSTP, MSTP
- Link Aggregation: Static Aggregation and LACP
- Multicast: IGMP Snooping V1/V2/V3
- QoS: SP, SWRR, WRR, 802.1p and DSCP
- Security: MAC ACL, IP ACL, 802.1X, RADIUS and DoS protection
- DHCP: DHCP Server, DHCP Relay and DHCP Snooping
- Management: Web, Console, Telnet and SNMP V1/V2/V3
- Lightning Protection: 6kV
- Power Supply: 100–240V AC, 50/60Hz
- Power Consumption: Less than 24W at full load
- Cooling: Fanless
- Dimensions: 440 × 178.8 × 44mm
- Operating Temperature: 0°C to 45°C
Important: Tenda’s current specification page lists the TEG5328F as non-rack-mountable, despite its 440mm × 44mm chassis dimensions. The Tenda Czech product listing, however, describes it as rackmount. For a product page, I would therefore avoid claiming standard 19-inch rack mounting unless your particular hardware revision confirms it.
FAQs
Is the TEG5328F a Layer 3 switch?
Yes. It supports Layer 3 functions including VLAN-based routing, IPv4 static routing and static ARP.
How many Gigabit ports does it have?
It has 24 Gigabit RJ45 ports plus 4 × 1Gbps SFP ports.
Does it support fiber connectivity?
Yes. The four dedicated 1000Mbps SFP ports can be used for Gigabit fiber uplinks.
Does the TEG5328F support PoE?
No. It is a non-PoE managed switch.
Does it support VLANs?
Yes. It supports IEEE 802.1Q VLAN and Layer 3 VLAN interfaces.
Can it be used as an aggregation switch?
Yes. Its Gigabit ports, SFP uplinks, Layer 3 routing, VLAN, link aggregation and advanced management features make it suitable for aggregation and core-layer network deployments.
Ideal For
- Enterprise networks
- Campus networks
- Medium and large businesses
- Network aggregation
- Core network deployments
- Server rooms
- Fiber network infrastructure
- CCTV networks
- IP phone networks
- Managed office networks
- Schools and institutions
- Hotels and commercial buildings







Reviews
There are no reviews yet.